- Contact Person : Mr. Pan Peter
- Company Name : Creator Industry (Suzhou) Co., Ltd.
- Tel : 86-512-68097125
- Fax : 86-512-68095197
- Address : Jiangsu,Suzhou,No. 499 Shijin road Xujiang Industry Park, Wuzhong District, Suzhou, Jiangsu Province, P R CHINA
- Country/Region : China
Plastic injection mould machine
Plastic injection mould machine
Specification:
Item | Model | CI-125 | ||
SCREM DIA. | mm | 36 | 40 | 45 |
INJ. VOLUME | cm3/shot | 148 | 182 | 231 |
INJ. CAPACITY | g/oz | 132/4.7 | 162/5.8 | 206/7.4 |
PLASTICIZING RATE | kg/hr (ps) | 43 | 59 | 80 |
INJ. PRESS | kgf/cm2 | 2270 | 1840 | 1455 |
INJ. STROKE | mm | 145 | ||
SCREW SPEED | rpm | 145 | ||
NOZZLE STROKE | mm | 300 | ||
NOZZLE FORCE | tonf(kN) | 3.5(34) | ||
CLAMP FORCE | tonf(kN) | 125(1225) | ||
CLAMP STROKE | mm | 520 | ||
MIN. THICKNESS | mm | 200 | ||
DAYLIGHT OPEN | mm | 720 | ||
TIE BAR DISTANCE | mm | 420x420 | ||
PLATEN SIZE | mm | 607x607 | ||
EJECTOR STROKE | mm | 85 | ||
EJECTOR FORCE | tonf(kN) | 4.9(48) | ||
OPENING FORCE | tonf(kN) | 7.4(73) | ||
MAX. SYS. PRESS | kgf/cm2 | 170 | ||
MAX. SYS. PRESS | kgf/cm2 | 18(25)/6 | ||
MOTOR POWER | kw(hp)/pole | 15(20)/4 | ||
HEATER CAPACITY | kw | 8.3 | ||
HYD. OIL REQ | L | 340 | ||
MACHINE DIMENSIONS | (LxWxH) M | 4.5x1.11x1.7 | ||
FLOOR SPACE | M | 3.88x1.05 | ||
FLOOR SPACE | M | 4.6 | ||
Features:
Clamping | |
Direct hydraulic damping | |
True parallelism between tie bars, high precision in find products | |
Strong platen, constrain is minimized | |
Clamping for ce is evenly distibuted | |
Improved tie bar spacing to acccpt larger molds | |
Fix two end points, maintain tie bar parallelism | |
Special tie bar structure design, reduce central constroin. | |
High speed Oil tank. | |
Oil supply with minimum friction. | |
Injection | |
Injection compression for thin wall products | |
Injection, storage | |
2nd charge function enable bigger capacity. | |
4 phose injection, 3 phose pressure cssure (changeable to 5 injection, 2 pressure) | |
3 phose charge. | |
Auto purge. | |
Injection end pont setup | |
Cold start protection. | |
Injection end point curve, injection precision statistic curve. | |
Display injection precision. | |
Single cylinder injection and charge motor in same axis. | |
Low injection & charge friction. | |
Low friction between barrdl & screw enable best transparent plastic injection. | |
Low noise. | |
Energy saving pump, full utilization of energy, save up to 40%* opion* | |
Controller | |
Programmable "STAR" controller, made in Japan | |
High resalution display screen with various function display. | |
SPC parameter is easy to set up & modify. | |
Monitor operation procedure. | |
Instart display operation & operation time. | |
Open, close mode & ejection. | |
Production management. | |
4 steps temperature setup, expand to 6 steps. | |
Oil temperature display in 1 section. | |
Oil prehcat function. | |
Thermo control curve. | |
100 SPC recard. | |
SPC precision comparison. | |
Internal storage of 60 machine setup. | |
Display temperature predision scale. | |
Pressure curve*, Speedcurve*. | |
IC memory card to expandstorage of machines setup*. | |
I
Plastic injection mould machine
